Air care for
the home
you share.
The air moving through your home deserves a complete plan: the right filtration, a clear airflow path and attention to what’s inside your ducts.
Lennox media cabinets & purification systems
Matched to your equipment. Maintained for your home.

A practical approach to your indoor air
More than a new box
in the basement.
Filtration helps capture particles from air passing through the system. It works alongside source control, appropriate ventilation and regular maintenance. A filter upgrade does not replace an inspection or solve every indoor-air concern.
Understand the difference
A filter, a cabinet
or a complete system?
Replacement filter
The consumable media that fits an existing cabinet or rack. Match its exact size and approved type.
Media air cleaner
A cabinet installed in the duct system with a replaceable media filter. Installation space and airflow determine the fit.
Powered purification
A system with filtration and additional powered components. Controls, electrical supply and maintenance need review.
Concept illustration only. Actual duct layouts and equipment vary.
Follow the air, not just the filter rating
One connected system.
Three places to pay attention.
- At the filterConfirm the cabinet, media size and approved replacement. Air needs to pass through the filter rather than around it.
- Inside the systemReview accessible components and duct condition. Cleaning recommendations should follow the inspection findings.
- Back into your roomsCheck supply and return paths. A blocked register, leak or undersized duct is an airflow problem, not a filter upgrade.
When the filter is only part of the story
What’s happening
inside your ducts?
A new filter won’t remove existing debris from ductwork. When there are signs of a problem, start with an inspection and identify the cause before deciding on cleaning.
Look for evidence.
Not a cleaning calendar.
Ask to see what was found and which parts of the system need attention.
When a closer look makes sense
Excessive debris or particles from registers
Heavy buildup or material blowing into rooms warrants an inspection. A light coating of dust alone does not establish a need for duct cleaning.
Suspected growth or moisture
Have suspected mold assessed by a qualified professional. Correct the moisture source; wet or moldy duct insulation may need replacement rather than cleaning.
Evidence of pests in ductwork
Address the infestation and entry points, then assess contamination and an appropriate cleanup plan.
Neither is a guaranteed health treatment. Duct cleaning also does not repair leaks, resize ducts or fix an airflow restriction elsewhere in the system. EPA recommends duct cleaning as needed, not as a routine schedule.
Read EPA’s duct-cleaning guidance ↗Replacing your filter
Keep the label.
Skip the guessing.
A familiar-looking filter may still be the wrong size. A nominal dimension can differ from its actual measurements, and a higher MERV number does not automatically make a filter suitable for your equipment.
See the information checklist ↓Have these details ready
- Cabinet or rack modelLook for the equipment label and any filter-cabinet identification.
- Existing filter informationRecord the part number, printed dimensions, thickness and MERV rating.
- Actual measurementsCheck the manufacturer’s specified replacement dimensions, not appearance alone.
- System and accessNote the furnace or air-handler model and where the filter slides out.
Before an upgrade
Filtration is part of the whole system.
Airflow comes first
Review filter resistance and the equipment’s airflow requirements. Do not substitute a higher-rated filter without checking suitability.
Allow room to service it
The cabinet must fit the ductwork and leave enough clearance to remove the filter and service any powered components.
Plan for maintenance
Follow the exact product’s inspection and replacement guidance. Household conditions and system use affect how quickly a filter loads.
Common questions
Good questions before you choose.
Can I put a MERV 16 filter in any furnace?
No. The rack or cabinet, filter dimensions, system airflow and pressure drop must be checked. The MERV rating alone does not establish compatibility.
Is PureAir the same thing as a media filter?
No. PureAir is a complete powered purification system. Media filters are one part of filtration; powered systems have additional components and service requirements.
How often should I replace my filter?
Use the instructions for your exact filter and system. Inspect as recommended and replace when required; there is no single interval that fits every home and filter.
Can a filter guarantee healthier air?
No filter or air cleaner guarantees a health outcome or removes every pollutant. Product performance, installation, airflow, maintenance and conditions in the home all matter.
Your next step
Bring your questions.
We’ll start with the fit.
Tell us your equipment and filter-cabinet model so we can help you review the fit.
Emergency right now? Call or text 414-595-5175, any hour.
Request service or a free replacement estimate
We call you back as soon as we can. You get a flat-rate price before any work begins, and repairs are guaranteed for one year, parts and labor.
Online requests are confirmed by phone or text. Repair visits starting at $89.99. Replacement estimates are free.
Thanks. We got your request.
We use your details to respond to your request. See our Privacy Policy for how our website, analytics and advertising tools handle information.
Ready when you are:




